Engineering, 13.12.2020 14:00 princessmnicole2
According to the AWS welding symbol in the following drawing, the contour of the weld is The weld is to be finished by
Answers: 2
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
Engineering, 04.07.2019 19:10
The air in an automobile tire with a volume of 0.015 m3 is at 32°c and 140 kpa gage. determine the amount of air that must be added to raise the pressure to the recommended value of 206 kpa gage. assume the atmospheric pressure to be 128 kpa and the temperature and the volume to remain constant.[r-0.287 kj/kgk]
Answers: 3
Engineering, 04.07.2019 19:20
Consider airflow over a flat plate of length l = 1.5 m under conditions for which transition occurs at le = 0.9 m based on the critical reynolds number, re,e = 5 x 10. evaluating the thermophysical properties of air at 400 k, determine the air velocity. (hint: use the tables to find the properties of air)
Answers: 3
Engineering, 06.07.2019 02:30
A75mm diameter shaft is supported in a journal bearing 75mm long with a diametral clearance of 0. 1mm. it supports a radial load of 1000 n and is lubricated with sae 50 oil at 70°c. find the friction torque and the power loss when the crankshaft rotates at 2900 rev/min.
Answers: 1
According to the AWS welding symbol in the following drawing, the contour of the weld is
The weld...
Chemistry, 14.04.2021 14:00
Business, 14.04.2021 14:00
Mathematics, 14.04.2021 14:00
English, 14.04.2021 14:00
Mathematics, 14.04.2021 14:00
Mathematics, 14.04.2021 14:00
Spanish, 14.04.2021 14:00
Mathematics, 14.04.2021 14:00
Biology, 14.04.2021 14:00