Engineering, 06.12.2020 14:00 krishawnnn

Digital Timer Requirement
In this part, you will design program for "DIGITAL TIMER" with countdown or count up functionality from 00 to 60. The counter will count from a preset value entered by the user (pre_set ) which can take from 00 to 60.
Features
• You may Use fix values to set the counting down value (pre_set).
• Use hotkeys to change between counting down by 1, up by 1, down by 2 or up by 2.
• Make sure that you define each digit as separate variable.
o So if we have 59 the first digit will be 9 and the second digit will be 5.
• Use hotkeys to choose :
o Preset the value to user number.
o Reset the counter to 00
o Start the counting.
• Use one hotkey to start the counting so that the first press will start counting the second press will stop the counting and the number will stay the same.
• Choose speed for the counting (hotkey).
o Fast counting speed.
o Slow counting speed.
• You should show an indication that the timer is finished, which is making output with one bit blinking on and off.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.

Answers: 1

Answer

Engineering, 03.07.2019 15:10

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

Answer

Engineering, 03.07.2019 15:10

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

Answer

Engineering, 03.07.2019 15:10

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

Answer

You know the right answer?

Digital Timer Requirement
In this part, you will design program for "DIGITAL TIMER" with cou...

Questions