subject
Engineering, 25.11.2020 14:40 0IggyMarie0

There is a mixing chamber connected with a valve. The chamber has two inlets and one exits. Liquid water at 200 kPa and 20 °C is heated in a chamber by mixing it with superheated steam at 200 kPa and 200 °C. Liquid water enters the mixing chamber at a rate of 2.5 kg/s, and the chamber is estimated to lose heat to the surrounding air at a rate of 1200 kJ/min. The mixture leaves the mixing chamber at 200 kPa and 70 °C. Assume steady state and ignore kinetic and potential energy effects. Assume there is no work or heat involved in the valve. Required:
a. If take the mixing chamber as the control volume, please list the simplified energy conservation equation for this CV.
b. If taking the mixing chamber and the valve as the combined control volume, please list the simplified energy conservation equation for this CV (leave it in symbolic form).
c. What is the mass flow rate at state 2?
d. There is a valve at the exit of the chamber to reduce the pressure to 20 kPa, determine the temperature at the exit of the valve

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:20
Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options
Answers: 2
question
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
You know the right answer?
There is a mixing chamber connected with a valve. The chamber has two inlets and one exits. Liquid w...
Questions