Engineering, 21.11.2020 04:50 3345
You have a motor that runs at 1.5 amps from a 12 volt power source, how many watts of power is it using?
Answers: 2
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
Engineering, 04.07.2019 18:10
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You have a motor that runs at 1.5 amps from a 12 volt power source, how many watts of power is it us...
Biology, 01.12.2021 01:00
Mathematics, 01.12.2021 01:00
Social Studies, 01.12.2021 01:00
Health, 01.12.2021 01:00
Mathematics, 01.12.2021 01:00
Chemistry, 01.12.2021 01:00
Mathematics, 01.12.2021 01:00
SAT, 01.12.2021 01:00
Mathematics, 01.12.2021 01:00