subject
Engineering, 19.11.2020 17:00 jordanmjdmary8571

Project: Researching a Local Sustainability Issue Assignment Directions
Your local government is researching the water management in the area. They have called on you as an environmental engineer to explain the current water management methods. You have been asked to describe the methods used by at least two other local areas and suggest the feasibility of adopting a new method. You must research this issue and provide your resources to support your reasoning. You may contact the local governments and find a person to interview, or you may research the issue in magazines or on the Internet. You will submit a three- to five-page report that includes a description of your area's water management methods, information about at least two other nearby areas, and a final analysis with a recommendation for a method. The recommendation may be that no change is made, but you must support your decision with facts and details found in your research.

Assignment Guidelines
Each report must include:

a description of the local area's water management methods
information about at least two other nearby areas’ water management methods
a final analysis with a recommendation
appropriate support including facts and details
a list of resources used for the report
Each analysis must include graphic representation.

Submission Requirements
Three to five pages double spaced
Proper grammar and vocabulary
Question # 1
File Upload
Upload your report that describes your area's water management methods and information about two other nearby areas; include your final analysis with a recommendation for a method.

Project: Researching a Local Sustainability Issue
Assignment Directions
Your local government is researching the water management in the area. They have called on you as an environmental engineer to explain the current water management methods. You have been asked to describe the methods used by at least two other local areas and suggest the feasibility of adopting a new method. You must research this issue and provide your resources to support your reasoning. You may contact the local governments and find a person to interview, or you may research the issue in magazines or on the Internet. You will submit a three- to five-page report that includes a description of your area's water management methods, information about at least two other nearby areas, and a final analysis with a recommendation for a method. The recommendation may be that no change is made, but you must support your decision with facts and details found in your research.

Assignment Guidelines
Each report must include:

a description of the local area's water management methods
information about at least two other nearby areas’ water management methods
a final analysis with a recommendation
appropriate support including facts and details
a list of resources used for the report
Each analysis must include graphic representation.

Submission Requirements
Three to five pages double spaced
Proper grammar and vocabulary
Question # 1
File Upload
Upload your report that describes your area's water management methods and information about two other nearby areas; include your final analysis with a recommendation for a method.

for harrodsberg Kentucy

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
question
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
question
Engineering, 04.07.2019 18:20
A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?
Answers: 3
You know the right answer?
Project: Researching a Local Sustainability Issue Assignment Directions
Your local government...
Questions
question
Chemistry, 16.11.2020 22:00
question
History, 16.11.2020 22:00
question
Mathematics, 16.11.2020 22:00