Engineering, 18.11.2020 16:50 Svetakotok
A source outputs data at the rate of 1,000,000 bits/sec. The transmitter uses binary PAM with raised cosine pulse shaping. If the ideal baseband channel has a cutoff frequency of 850 kHz, what is the maximum roll-off factor that can be applied to the pulse shaping?
Answers: 1
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
Engineering, 04.07.2019 18:10
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
A source outputs data at the rate of 1,000,000 bits/sec. The transmitter uses binary PAM with raised...
Mathematics, 16.11.2020 18:20
Mathematics, 16.11.2020 18:20
History, 16.11.2020 18:20
History, 16.11.2020 18:20
Mathematics, 16.11.2020 18:20
History, 16.11.2020 18:20
Chemistry, 16.11.2020 18:20
Mathematics, 16.11.2020 18:20
Spanish, 16.11.2020 18:20
Business, 16.11.2020 18:20