Redundancy is important because
A.) Safety is increased
B.) Some aviation systems have a rela...
Engineering, 13.11.2020 20:20 rosehayden21
Redundancy is important because
A.) Safety is increased
B.) Some aviation systems have a relatively high failure rate
C.) More than one system should be available for critical flight
D.) All of the above
Answers: 1
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
Advanced Placement (AP), 27.07.2021 02:30
Mathematics, 27.07.2021 02:30
Mathematics, 27.07.2021 02:30
Mathematics, 27.07.2021 02:30
Spanish, 27.07.2021 02:30
Mathematics, 27.07.2021 02:30
French, 27.07.2021 02:30
Mathematics, 27.07.2021 02:30