Create a function named CalcDeflection that, using Eqs. 1 through 4, calculates the deflection of a simply supported beam for a single, point load. The inputs to this function will be a vector of positions along the beam (in meters) where the deflection will be calculated, the magnitude of the force on the beam [N], the location of the force on the beam [m], the elasticity of the beam, and the length, width and height of the beam [m]. This function will have a single output: a vector containing the beam deflection (in millimeters) at each corresponding point along the beam.

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?