subject
Engineering, 04.11.2020 01:00 MaryLIT

A cathode ray tube is made of glass with a small amount of some kind of gas in it. It has metal electrodes at each end to pick up an electric current. The electrodes are named "positive” and "negative,” which were words used by Benjamin Franklin in the 1700s to describe electricity. A bright ray forms in the gas when an electric current is applied to metal electrodes. In the 1800s, an important scientist suspected that the negatively charged particles in a cathode ray were present in all atoms. What procedure would allow that scientist to investigate this idea?
observing if the cathode ray forms when the electric current is off
making cathode ray tubes out of different materials to see if the ray is the same
using different magnets to see if the cathode ray responds in the same way to each
changing the strength of the electric current and observe how the ray forms and changes

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
question
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
question
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
question
Engineering, 04.07.2019 19:10
10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.
Answers: 2
You know the right answer?
A cathode ray tube is made of glass with a small amount of some kind of gas in it. It has metal elec...
Questions
question
Advanced Placement (AP), 12.10.2020 01:01