Engineering, 30.10.2020 18:50 RayQuan115
When using pliers, you should always rock the pliers from side to side until you loosen the nut?
a. True
b. False
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
You know the right answer?
When using pliers, you should always rock the pliers from side to side until you loosen the nut?
a....
Questions
History, 05.11.2019 08:31
English, 05.11.2019 08:31
English, 05.11.2019 08:31
Mathematics, 05.11.2019 08:31
Mathematics, 05.11.2019 08:31
English, 05.11.2019 08:31
Mathematics, 05.11.2019 08:31
Mathematics, 05.11.2019 08:31
Mathematics, 05.11.2019 08:31
Advanced Placement (AP), 05.11.2019 08:31
Chemistry, 05.11.2019 08:31
