Plz help it's due in 10 min. Will give brainliest. Can anyone help me with this welding assignment?

In the GMAW process, the electrode comes in what form?

What replaces flux in the GMAW process?

In the GMAW process, what two shielding gases are commonly used when welding on steel?

What welding organization has designated GMAW as the proper name for the wire feed welding process?

List two factors that could affect weld quality even before welding begins?

Explanation:

1=Gas metal arc welding (GMAW), sometimes referred to by its subtypes metal inert gas (MIG) welding or metal active gas (MAG) welding, is a welding process in which an electric arc forms between a consumable MIG wire electrode and the workpiece metal(s), which heats the workpiece metal(s), causing them to melt and join.

2=Gas metal arc welding, better known as GMAW or MIG welding, uses a continuously fed solid wire electrode that is used for filler metal that welds together two pieces of metal. ... As the wire burns, the flux agents and shield gases are produced, and help produce a strong weld, the LE website stated.

3=Carbon dioxide in concentration of 1-2% is commonly used in the mix with argon to reduce the surface tension of the molten metal. Another common blend is 25% carbon dioxide and 75% argon for GMAW. Helium is lighter than air; larger flow rates are required. It is an inert gas, not reacting with the molten metals.

4=Gas metal arc welding (GMAW), sometimes referred to by its subtypes metal inert gas (MIG) welding or metal active gas (MAG) welding, is a welding process in which an electric arc forms between a consumable MIG wire electrode and the workpiece metal(s), which heats the workpiece metal(s), causing them to melt and join.

5=Filler Metals: ...

Surface Conditions:

Hope this works!!!

answer:

yes that is right have a good day

answer:

c

explanation: