subject
Engineering, 25.10.2020 01:00 fatty18

4. Determine the enthalpy (h) for water at (a) 200 ℃ with a specific volume of 0.9 m^3⁄kg.
(b) 100 ℃ at a pressure of 0.7 bar.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
question
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
question
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
You know the right answer?
4. Determine the enthalpy (h) for water at (a) 200 ℃ with a specific volume of 0.9 m^3⁄kg.
(...
Questions
question
Computers and Technology, 25.09.2019 02:40
question
Mathematics, 25.09.2019 02:40
question
Mathematics, 25.09.2019 02:40
question
Mathematics, 25.09.2019 02:40