Engineering, 21.10.2020 16:01 josdrom

6. A single cylinder engine running at 180 rpm develops a torque of 8 Nm. The indicated power of the engine 1.8 kW. Find the loss due to friction power as the percentage of brake
power.
(3Marks)

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges

Answers: 1

Answer

Engineering, 06.07.2019 04:10

Ir at sea level and 30°c and 50% relative humidity flows at a rate of 1 kg/s through a cooling coil that has an apparatus dewpoint of 10°c. the air leaves the coil at 15°c. determine the following: 3.1)- relative humidity of the air leaving the coil; 3.2)- moisture content of the air leaving the coil; 3.3)- sensible heat factor; 3.4)- total heat transfer rate; 3.5)- sensible heat transfer rate 3.6)- latent heat transfer rate

Answers: 1

Answer

Engineering, 06.07.2019 05:20

A)- define powder metallurgy b)- identify the major steps associated with the powder metallurgy process. present the answer in a point format, and include process flowchart. c)- identify two limitations and two advantages of the powder metallurgy process.

Answers: 1

Answer

You know the right answer?

6. A single cylinder engine running at 180 rpm develops a torque of 8 Nm. The indicated power of th...

Questions