Engineering, 16.10.2020 14:01 vshelton6549

The assembly has the diameters and material indicated. If it fits securely between its fixed supports when the temperature is T1=70℉, determine the average normal stress in each material when the temperature reaches T1=110℉. (Young’s Moduli are 10.6×10^6 kip/in^2, 15×10^6 kip/in2, and 28×10^6 kip/in^2 for aluminum, bronze, and steel, respectively. The coefficients of thermal expansion are 12.8 μstrain/°F, 9.60 μstrain/°F, 9.60 μstrain/°F for aluminum, bronze, and steel, respectively.)

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Plan an experiment to measure the surface tension of a liquid similar to water. if necessary, review the ncfmf video surface tension for ideas. which method would be most suitable for use in an undergraduate laboratory? what experimental precision could be expected?

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Aplate of dimensions 3 m x 3 m is placed 0.37 mm apart from a fixed plate. the plate requires a force of 2n to move at speed of 45 cm/s. evaluate the viscosity of the fluid in between the plates

Answers: 3

Answer

Engineering, 06.07.2019 02:30

An electric motor is used to drive a power press which makes steel turning moment diagrams 323 pressings from a metal sheet. the motor runs at a mean speed of 50 rev/s. the torque required is 10.0nm for 0.2s, followed by 1.0nm for0.3 s with this sequence then being repeated. what is the minimum power required of the motor and the moment of incrtia required for the t1ywhcel if the speed fluctuations are to be restricted to 1.5%?

Answers: 3

Answer

You know the right answer?

The assembly has the diameters and material indicated. If it fits securely between its fixed support...

Questions

Engineering, 13.02.2021 02:00

Which earthing system needs the consumer to provide an earth via an earth electrode...