Engineering, 13.10.2020 02:01 cannaincorporated

Air enters the compressor of an air-standard regenerative gas turbine at p1 = 14.7 lbf/in.2 , T1 = 530oR with a mass flow rate of 90,000 lb/h. The compressor overall pressure ratio is 10, the turbine inlet temperature is 2200oR, and the regenerator effectiveness is 80%. Determine the thermal efficiency and net power developed, in hp, for each of the following configurations A. Introduce two-stage compression with intercooling between the compressor stages at a pressure of 50 lbf/in.2 Each compressor stage has an isentropic efficiency of 84% and the temperature of the air entering the second stage is 530oR. The isentropic turbine efficiency is 88%. B. Introduce two-stage expansion with reheat between the turbine stages at a pressure of 50 lbf/in.2 Each turbine stage has an isentropic efficiency of 88% and the temperature of the air entering the second stage is 2000oR. The isentropic compressor efficiency is 84%.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

Answer

You know the right answer?

Air enters the compressor of an air-standard regenerative gas turbine at p1 = 14.7 lbf/in.2 , T1 = 5...

Questions