Engineering, 12.10.2020 23:01 steve4020
For each instruction below assume initially (PC) = 0x0002AE, (SR) = 0x0002, (w0) = 0x, (w1) = 0x080A, (w15) = 0x080A, and the contents of the 8 sequential bytes in data memory beginning at 0x0806 are 0x01, 0x23, 0x45, 0x67, 0x89, 0xAB, 0xCD, and 0xEF. Give the contents of any registers which have changed after each of the following instructions executes:
a) mov 0x080C, w0.
b) sub w1, w0, w0.
c) mov [w15++], [--w1].
d) cp0 w0 (e) bra Z, 0x0002b4.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Engineering, 04.07.2019 18:20
Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process
Answers: 1
Engineering, 06.07.2019 02:30
On solidification from a melt, the polymer polyethylene forms a semi-crystalline spherulite structure. (i) sketch an individual spherulite and label the amorphous and crystalline regions. (ii) draw a schematic to show the changes in specific volume with temperature during cooling from the melt, comparing it to the theoretical extremes of fully crystalline and fully amorphous (indicate tm and tg)
Answers: 2
Engineering, 06.07.2019 04:20
Consider the transfer function for a first-order system g(s)=12(s+7)/(s^2+2s+9) for this system determine: a) poles and zeros of the function, b) the natural frequency and damping ratio, c) the peak value achieved in response to a unit step input, d) the peak time for a unit step input, e) the steady-state system response to a unit step input
Answers: 2
You know the right answer?
For each instruction below assume initially (PC) = 0x0002AE, (SR) = 0x0002, (w0) = 0x, (w1) = 0x080A...
Questions
Mathematics, 22.10.2020 16:01
Mathematics, 22.10.2020 16:01
Mathematics, 22.10.2020 16:01
