subject
Engineering, 12.10.2020 14:01 stevenabdullatif16

The mixing tank has inflow and outflow tubes and a stirrer that keeps the concentration uniform at all points in the tank. The tank is initially filled by a volume V of solution, formed by dissolving a given solute in a solvent, with concentration Co (measured in kg/l); The inflow tube carries a solution of different concentration Cin than the initial concentration; the volumetric flowrate is Qin The outflow flowrate is Qout and, due to the well-mixed assumption, the outflow concentration has the same concentration as the instantaneous concentration of the tank. (i) Derive the differential equation governing the instantaneous concentration in the tank; (ii) Assume the tank volume is 1000 l, the volume initially contains 10 kg of salt, the rate of inflow is 2 l/s, the inflow concentration is 0.005 kg/l and that Qin = Qout (in other words, the out ow pipe carries away the over ow). Required:
a. Calculate and plot the instantaneous concentration of salt C(t);
b. Calculate the time required to produce a solution of concentration 0.008 kg/l.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
question
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
question
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
question
Engineering, 04.07.2019 18:10
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
You know the right answer?
The mixing tank has inflow and outflow tubes and a stirrer that keeps the concentration uniform at a...
Questions
question
Health, 22.03.2020 00:41
question
Chemistry, 22.03.2020 00:41
question
Mathematics, 22.03.2020 00:42
question
Physics, 22.03.2020 00:42