Engineering, 08.10.2020 09:01 antcobra
An aquifer has three different formations. Formation A has a thickness of 8.0 m and hydraulic conductivity of 25.0 m/d. Formation B has a thickness of 2.0 m and a conductivity of 142 m/d. Formation C has a thickness of 34 m and a conductivity of 40 m/d. Assume that each formation is isotropic and homogeneous. Compute both the overall horizontal and vertical conductivities.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
Engineering, 04.07.2019 19:10
What are the major differences between injection molding and extrusion?
Answers: 2
You know the right answer?
An aquifer has three different formations. Formation A has a thickness of 8.0 m and hydraulic conduc...
Questions
Mathematics, 21.01.2021 02:30
Mathematics, 21.01.2021 02:30
Geography, 21.01.2021 02:30
Mathematics, 21.01.2021 02:30
Mathematics, 21.01.2021 02:30
Mathematics, 21.01.2021 02:30
Mathematics, 21.01.2021 02:30
English, 21.01.2021 02:30
Mathematics, 21.01.2021 02:30
