Your process has a feed stream of air at 4.0 bar and 250C, with a hot product stream at 850C and a cold product stream at -50C. The cold stream has a mass flow rate that is 30% of the mass flow rate of the hot product stream. Assuming that the hot stream and the cold stream both have the same pressure, what is the range of thermodynamically feasible outlet pressures?

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented