Engineering, 23.09.2020 08:01 jerry1496

Seawater containing 3.50 wt% salt passes through a series of 9 evaporators. Roughly equal quantities of water are vaporized in each of the 9 units and then condensed and combined to obtain a product stream of fresh water.
The brine leaving each evaporator but the 9th is fed to the next evaporator.
The brine leaving the 9th evaporator contains 4.70 wt% salt. It is desired to produce 1 x 104 L/h of fresh water.1) How much seawater must be fed to the process?(in kg/h)2) What is the mass flow rate of concentrated brine out of the process?(in kg/h)3) What is the weight percent of salt in the outlet from the 4th evaporator?4) What is the fractional yield of fresh water from the process (kg H2O recovered/kg H2O in process feed)?

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

Engineering, 04.07.2019 18:10

True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa.s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)

Answers: 3

Answer

Engineering, 04.07.2019 19:10

How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?

Answers: 2

Answer

You know the right answer?

Seawater containing 3.50 wt% salt passes through a series of 9 evaporators. Roughly equal quantitie...

Questions