subject
Engineering, 22.09.2020 19:01 hugoreyes16jr

Consider an AC voltage source which is supplying electric power to a network of parallel connected loads. These loads include a 13.25 kW electric heating load (purely resistive), an induction motor operating at rated conditions (7.5kVA at 0.85 power factor lagging), and a synchronous condenser operating at rated conditions (13 HP at 0.9 power factor leading). (a) Draw the system described.
(b) What is the real power delivered by the source?
(c) What is the reactive power delivered by the source?
(d) What is the apparent power delivered by the source? (e) Sketch the power triangle for the source.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
question
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
question
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
You know the right answer?
Consider an AC voltage source which is supplying electric power to a network of parallel connected l...
Questions
question
Mathematics, 09.07.2019 00:30