Engineering, 20.09.2020 16:01 loraross77

Considerable research and development effort is going into increasing the maximum Tt4 in gas turbine engines for fighter aircraft. For a mixed- flow turbofan engine with 7r~. = 16 at a flight condition of Mo = 2.5 and To = 216.7 K, use the PARA computer program to determine and plot the required engine fan pressure, specific thrust, and specific fuel consumption vs Tt4 over a range of 1600 to 2200 K for bypass ratios of 0.5 and 1. Use hpR=42,800kJ/kg, Cp= 1.004kJ/(kg-K), and y = 1.4. Comment on your results in general. Why do the plots of specific fuel consumption vs specific thrust for these engines all fall on one line?

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 19:30

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

Answer

You know the right answer?

Considerable research and development effort is going into increasing the maximum Tt4 in gas turbine...

Questions