Engineering, 20.09.2020 09:01 kyleataylor2005

A gas is contained in a closed piston-cylinder device and undergoes the following three processes. Process 1-2: A constant pressure process from 100 kPa and 0.002 m^3 (State 1) to a volume of 0.004 m^3 (State 2)
Process 2-3: A constant volume process with heat transfer to State 3
Process 3-1: A polytropic compression process PV^1.4= constant to state 1.

Required:
a. Determine the pressure and volume at State 3, in kPa and m^3, respectively.
b. Draw the P-V diagram showing the three processes. Label states and identify process directions with arrows.
c. Find the work for each process, in kl.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

Answer

You know the right answer?

A gas is contained in a closed piston-cylinder device and undergoes the following three processes....

Questions