Engineering, 08.09.2020 20:01 nickwwe13
Hot water at 330 K is transferred through a steel pipe (kpipe = 60 W/m·K) with the outer diameter of 50 mm and the wall thickness of 5 mm. Surrounding environment is air at T¥ = 270 K and V = 10 m/s in cross flow over the pipe. Calculate the heat loss from the pipe to the air per meter of pipe length in W/m.
Answers: 3
Engineering, 03.07.2019 15:10
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Hot water at 330 K is transferred through a steel pipe (kpipe = 60 W/m·K) with the outer diameter of...
Computers and Technology, 26.06.2020 21:01
Mathematics, 26.06.2020 21:01
Mathematics, 26.06.2020 21:01
Computers and Technology, 26.06.2020 21:01
Mathematics, 26.06.2020 21:01