Engineering, 08.09.2020 14:01 EMQPWE
What should be done to reduce refrigerant loss from a purge unit on a r123 chiller?
A. Leak test and repair the chiller.
B. Seal the purge unit discharge line.
C. Pipe purge unit back into the low side.
D. Pipe purge unit back into recovery unit.
Answers: 1
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 18:20
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
What should be done to reduce refrigerant loss from a purge unit on a r123 chiller?
A. Leak test an...
Business, 24.07.2019 14:00
Biology, 24.07.2019 14:00
Biology, 24.07.2019 14:00
History, 24.07.2019 14:00
Health, 24.07.2019 14:00
Mathematics, 24.07.2019 14:00
Arts, 24.07.2019 14:00
Biology, 24.07.2019 14:00
Biology, 24.07.2019 14:00
Social Studies, 24.07.2019 14:00
Chemistry, 24.07.2019 14:00