Engineering, 08.09.2020 14:01 Davidbg23
Investigate the squared-and-ground-ended helical compression spring shown below to see if it is solid-safe. If not, what is the largest free length to which they can be wound using ns 1.2?
Wire diameter Outside coil diameter Free length Total coils Material
0.148 in 2.12 in 2.5 in 5.75 A227 hard-drawn steel
Answers: 3
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
Investigate the squared-and-ground-ended helical compression spring shown below to see if it is soli...
Geography, 29.10.2020 20:10
English, 29.10.2020 20:10
Mathematics, 29.10.2020 20:10
Mathematics, 29.10.2020 20:10
Spanish, 29.10.2020 20:10
Mathematics, 29.10.2020 20:10
Mathematics, 29.10.2020 20:10
Biology, 29.10.2020 20:10
English, 29.10.2020 20:10
Mathematics, 29.10.2020 20:10