Engineering, 27.08.2020 15:01 Jlynbodmer

Copper (cu) has crystal structure Atomic mass of Cu is 63.55 gmol^-1 and radius of a copper atom is 0.128 nm, mean speed of conduction electrons in Cu is 1.5 ×10^6 ms^-1 and frequency of vibration of the Cu atoms at 27 °C is 4×10^12 S^-1 Nordheim’s Coefficient of Au in Cu is 5500 Ω −m Caculate (a) the atomic density of copper (b) Estimate the drift mobility of electronics in cu (c) find the resistivity of pure copper cu (d) find the resistivity of copper if 1 at % of Au is mixed in Cu

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 03:10

What precautions should you take to prevent injuries when dealing with heavy loads?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

Answer

You know the right answer?

Copper (cu) has crystal structure Atomic mass of Cu is 63.55 gmol^-1 and radius of a copper atom is...

Questions