Engineering, 27.08.2020 03:01 Daddysgirl2019
When should the word "drill" replace the word "diameter" when dimensioning a hole?
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
When should the word "drill" replace the word "diameter" when dimensioning a hole?...
Questions
Spanish, 03.12.2019 19:31
Biology, 03.12.2019 19:31
Health, 03.12.2019 19:31
English, 03.12.2019 19:31
English, 03.12.2019 19:31
English, 03.12.2019 19:31
Mathematics, 03.12.2019 19:31
English, 03.12.2019 19:31
Biology, 03.12.2019 19:31
Computers and Technology, 03.12.2019 19:31
Mathematics, 03.12.2019 19:31
