Consider the following snapshot of a system: Process Allocation Max Available
A B C D A B C D A B C D
P0 1 2 0 1 1 6 6 2 0 2 2 0
P1 1 0 0 1 1 1 0 1
P2 0 4 4 0 1 4 4 2
P3 0 0 0 2 0 0 2 3
P4 1 0 0 1 3 7 4 4
a) Is the system in a safe state (Use algorithm to show it)?
b) Is a request from Process P4 arrives for (0, 1, 0, 0) can the request be granted immediately (Use the data to show it)?
c) Is a request from Process P4 arrives for (0, 0, 1, 0) can the request be granted immediately (Use the data to show it)?

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan