subject
Engineering, 16.08.2020 15:01 shymitch32

In a steam plant operating on a Rankine cycle, superheated steam is supplied at 40 bar and 600degrees Celcius to a turbine operating adiabatically and the condenser pressure is 0.08 bar. Calculate, per kilogram of steam (feed pump work should be considered in (b),(d),(e) and (f), (a) the work output neglecting the feed pump work (b) the work required to 3 decimal places for the feed pump if vf is 0.0010035 (c) the heat rejected by condenser cooling water and the amount of cooling water required through the condenser, if the temperature rise of the water is assumed to be 10 K and take the specific heat capacity of water as 4.183 kJ/Kg K (d) the heat supplied, (e) the Rankine efficiency (f) the specific steam consumption in kg/kW-h

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
question
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
question
Engineering, 04.07.2019 18:20
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
question
Engineering, 04.07.2019 19:10
The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false
Answers: 2
You know the right answer?
In a steam plant operating on a Rankine cycle, superheated steam is supplied at 40 bar and 600degree...
Questions
question
Health, 05.02.2021 23:00
question
Mathematics, 05.02.2021 23:00