Air at atmospheric pressure and a temperature of 25°C is in parallel flow at a velocity of 5 m/s over a 1‐m‐long flat plate that is heated from below with a uniform heat flux of 1250 W/m2. Assume the flow is fully turbulent over the length of the plate. Evaluate properties at 325 K. (a) Calculate the plate surface temperature, T s ( x ) , in °C, and the local convection coefficient, h x ( x ) , in W/m2·K. at x = 0.5 m. (b) Calculate the average temperature of the plate surface, T ¯ s , in °C.

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k