subject
Engineering, 29.07.2020 04:01 multezemaleme

The pressure and temperature at the beginning of compression of an air-standard Diesel cycle are 100 kPa and 300 K, respectively. At the end of the heat addition, the pressure is 6821 kPa and the temperature is 2150 K. Allowing for variable specific heats, determine: a) the compression ratio (22.08).
b) the cutoff ratio (2.08).
c) the thermal efficiency of the cycle, (65.7 %).
d) the mean effective pressure, mep (851.5 kPa).

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
question
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
question
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
question
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
You know the right answer?
The pressure and temperature at the beginning of compression of an air-standard Diesel cycle are 100...
Questions
question
Mathematics, 11.02.2020 02:28
question
Mathematics, 11.02.2020 02:28