Engineering, 28.07.2020 23:01 lesliealvarado1022
Highly reflective aluminum coatings may be formed on the surface of a substrate by impacting the surface with molten drops of aluminum. The droplets are discharged from an injector, proceed through an inert gas (helium), and must still be in a molten state at the time of impact. Consider conditions for which droplets with a diameter, velocity, and initial temperature of D 500 um, V 3 m/s, and T 1067 K, respectively, traverse a stagnant layer of atmospheric helium that is at a temperature of T- 300 K. What is the maximum allowable thickness of the helium layer needed to ensure that the temperature of droplets impacting the substrate is greater than or equal to the melting point of aluminum (T2 Tmp 933 K)? Properties of the molten aluminum may be approximated as rho-2550 kg/m3, cp = 1200 J/kg. K, and k-200 Win. K. (Hint: The surface temperature of the aluminum, 7s, is changing. Therefore, if you need to use T, to identify any properties, you need to sclect a proper 7, and please justify your selection.) Droplet injector -Molten alumnum, V, D Aluminum coating Cold substrate
Answers: 3
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
Engineering, 04.07.2019 18:20
Prove the equivalence between the two statements of the 2nd law of thermodynamics (i.e., a violation of one statement leads to the violatio the other statement)
Answers: 2
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
Highly reflective aluminum coatings may be formed on the surface of a substrate by impacting the sur...
Physics, 17.04.2021 18:50
Chemistry, 17.04.2021 18:50
Mathematics, 17.04.2021 18:50
History, 17.04.2021 18:50
Chemistry, 17.04.2021 18:50
Mathematics, 17.04.2021 18:50
Mathematics, 17.04.2021 18:50