subject
Engineering, 22.07.2020 01:01 amycressey1970

Select the best answer for the question 14. After treating the expansion valve with a blast of CO2 from a fire extinguisher, you've determined that the valve is defective. What part of the test led you to
this conclusion?
O A. The valve allowed CO2 to leak through the vents
OB. The low-side pressure failed to go into a vacuum
O C. The flow of refrigerant to the evaporator became blocked
O D. The accumulator temperature became higher than the orifice tube temperature,

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
question
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
question
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
question
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
You know the right answer?
Select the best answer for the question 14. After treating the expansion valve with a blast of CO2...
Questions
question
Mathematics, 10.03.2020 09:58
question
Mathematics, 10.03.2020 10:00
question
Mathematics, 10.03.2020 10:00