subject
Engineering, 16.07.2020 22:01 sparky1234

Consider a compact specimen that is loaded cyclically at a constant load amplitude with Pmax = 18 kN and Pmin = 5 kN. Using the fatigue crack growth data in Problem 5.1, calculate the number of cycles required to grow the crack from a/W = 0.35 to a/W = 0.60. Plot crack size vs. cumulative cycles for this range of a/W.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 19:30
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
question
Engineering, 04.07.2019 19:10
The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object
Answers: 1
question
Engineering, 04.07.2019 19:10
Which of the following is the most important advantage of a large field of view? a. allows larger areas to be examined b. relieves eyestrain c. minimizes parallax errors. d. increases precision in proportion to the in- crease in field of view
Answers: 2
question
Engineering, 04.07.2019 19:20
Air enters a horizontal, constant-diameter heating duct operating at steady state at 290 k, 1 bar, with a volumetric flow rate of 0.25 m°/s, and exits at 325 k, 0.95 bar. the flow area is 0.04 m2. assuming the ideal gas model with k = 1.4 for the air, determine (a) the velocity at the inlet and exit, each in m/s, and (c) the rate of heat transfer, in kw flow rate, in kg/s, (b) the mass kg 0.3
Answers: 2
You know the right answer?
Consider a compact specimen that is loaded cyclically at a constant load amplitude with Pmax = 18 kN...
Questions
question
Biology, 21.04.2021 18:00