subject
Engineering, 13.07.2020 21:01 camzs

3. (9 points) A square-thread power screw is used to raise or lower the basketball board in a gym, the weight of which is W = 100kg. See the following two figures. For power screws, assume a major diameter d = 20mm, and a pitch of p = 2mm with double threads. The friction coefficient of steel parts is f = 0.1. Gravity constant is g = 10/kg. (a) (7 points) If the purchased Cordless Electric Power Screwdrivers rotates at 300rpm, determine the power you need to raise to the basket board. (b) (2 points) Check if the self-locking condition of the power screw is satisfied or not.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
question
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
question
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
question
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
You know the right answer?
3. (9 points) A square-thread power screw is used to raise or lower the basketball board in a gym, t...
Questions
question
Spanish, 24.09.2019 01:30
question
History, 24.09.2019 01:30