Engineering, 04.07.2020 18:01 mia3128
The heat flux that is applied to the left face of a plane wall is q′′=20 W/m2. The wall is of thickness L = 10 mm and of thermal conductivity k=12 W/m∙K. If the surface temperatures of the wall are measured to be 50 ℃ on the left side and 30 ℃ on the right side, do steady-state conditions exist? slader
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
You know the right answer?
The heat flux that is applied to the left face of a plane wall is q′′=20 W/m2. The wall is of thickn...
Questions
Computers and Technology, 22.02.2022 15:20
Health, 22.02.2022 15:20
Mathematics, 22.02.2022 15:20
Mathematics, 22.02.2022 15:30
Spanish, 22.02.2022 15:30
Mathematics, 22.02.2022 15:30
Mathematics, 22.02.2022 15:30
