After a car is jump started, you must unclip the jumper cable clips.

The correct answer is;

In the reverse order you connected them

Explanation:

The process of jump starting a car is as follows;

1) Connect the positive or red clip to the dead battery

2) Connect the other end of the positive or red clip to the other end of the live battery in the donor car

3) Connect the negative or black clip to the negative terminal on the live battery

4) Connect the other end of the negative or black clip to the bare metal (without paint coating) on the donor car

5) Start and idle the donor car

6) Test to see if there is electric power in the dead car. If yes, then start the dead car

By disconnecting in the reverse other, that is by first removing the black or negative terminal from the dead vehicle chassis, prevents short circuiting the system with the rest of the metals parts in vehicle body when a metal makes contact while the positive terminal is removed and the negative terminal is still on the chassis.

b. check your rearview mirror

explanation:

d would be the most obvious choice to this question. leaders are supposed to herd their underlings like a shepherd to sheep. a leader should also listen to others when they are talking to one other to gain a better understanding of their mission and surroundings.

explanation: