Engineering, 30.06.2020 18:01 zahriaarana

Data Table 1: Resistors in Series Battery Voltage R1 R2 R3 Rea 1.60 V Calculated Resistance (12) 100 1000 2200 3300 5% 5% 5% 5% Tolerance from Color Code (92) DMM Resistance (12) 100.222 105002 2.1422 1152.3422 DMM Current (mA) 0.12mA 0.12mA 0.12mA 0.36mA DMM Voltage (V) 0.12V 1.20V 0.26V 1.58V Calculated Voltage (V) 12.02 x 10^-3V 1.2V 0.0002568V 1.2123V Calculated Current (mA) 0.00037mA 0.00037mA 0.00037mA 0.00037mA Data Table 2: Resistors in Parallel Battery Voltage 1.60 R1 R3 Rea Calculated Resistance (12) 100 1000 2200 3300 DMM Resistance (12) 00.822 00.812 00.802 2.412 DMM Voltage (V) 1.6V 1.6V 1.6V 4.8V DMM Current (mA) -0.72mA -0.15mA -1.6mA -2.5mA Calculated Voltage (V) 1.53V 1.5V -1.92V 0.485V Calculated Current (mA) 15.2mA 1.5mA -0.873mA 1.6mA Data Table 3: Resistors in Combination Battery Voltage Ri R2 R23 Rea 1.60 100 1000 2200 1790 3300 Calculated Resistance (12) DMM Resistance (12) 100.222 105022 2.1422 2.1422 1152.3412 DMM Voltage (V) 0.54V 1.02V 0.0034V 1.02V 2.6V DMM Current (mA) 1.6mA 1.6mA 0.10mA 0.09mA 3.31mA Calculated Voltage (V) 0.049V 0.49V 1.1V 0.34V 1.6V Calculated Current (mA) 0.49mA 0.49mA 0.49mA 0.25mA 1.5mA How do the magnitudes of the currents through the full circuits compare for Parts I-III of this exercise, in which resistors are combined in series, in parallel, and in combination? Use the data recorded in Data Tables 1-3 to answer this question.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?

Answers: 3

Answer

You know the right answer?

Data Table 1: Resistors in Series Battery Voltage R1 R2 R3 Rea 1.60 V Calculated Resistance (12) 100...

Questions