Engineering, 24.06.2020 02:01 alisonlebron15

Steam leaves the boiler of a 100 mw rankine cycle power plant at 400 C and 3.5 MPa. The turbine has an isentropic efficiency of 85% and exhausts at 15 kPa. In the condenser, the water is subcooled to 38 C by lake water at 13 C. The pump isentropic efficiency is 75%. Part a) Draw and label the T-s diagram for this cycle
Part b) Determine the cycle’s thermal efficiency
Part c) Determine the mass flow rate of the steam in the boiler (kg/h)
Part d) Determine the back-work ratio
Part e) Determine the minimum required cooling water flow rate if regulations limit the cooling water temperature rise to 10°C (kg/h)

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

Answer

Engineering, 04.07.2019 08:10

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

Answer

You know the right answer?

Steam leaves the boiler of a 100 mw rankine cycle power plant at 400 C and 3.5 MPa. The turbine has...

Questions