subject
Engineering, 20.06.2020 20:57 ijohnh14

A NASCAR racing team is conducting experiments to determine the suitability of a new fuel, code-named fuel-X. The specific gravity of fuel-X is 0.85. It is accelerated through an ideal conical nozzle which discharges to the atmosphere and impacts a restrictor plate. The inlet diameter of the nozzle is 5 cm and the outlet diameter is 2 cm. Careful measurements by the race team indicate that a reaction of 500 N is required to hold the plate stationary. What is the mass flow rate of the fuel

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
question
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
question
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
question
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
You know the right answer?
A NASCAR racing team is conducting experiments to determine the suitability of a new fuel, code-name...
Questions
question
Mathematics, 24.02.2021 18:20
question
English, 24.02.2021 18:20
question
Mathematics, 24.02.2021 18:20
question
Mathematics, 24.02.2021 18:20
question
Geography, 24.02.2021 18:20
question
Mathematics, 24.02.2021 18:20
question
Mathematics, 24.02.2021 18:20