Class Problem #3 Develop Figure 2.7. This is the spreadsheet we developed in the class. You will need to
recreate this spreadsheet yourself. Leave the spreadsheet live and change the number of
parts in simulation Table from 1 to 20 and note down the probability that 1 through 20
modules out of 30 modules tested and found to be defective made by irregular current
(Similar to Figure 2.8). Plot this probability (data from Figure 2.8) as a function of
defective modules (Figure 2.9) made by irregular current.
Hint: You are reproducing Figure 2.9 but using data obtained from live spreadsheet
developed in the class.
해

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan