subject
Engineering, 19.06.2020 22:57 esnyderquintero

For a bronze alloy, the stress at which plastic deformation begins is 274 MPa and the modulus of elasticity is 112 GPa. (a) What is the maximum load that may be applied to a specimen having a cross-sectional area of 338 mm2 without plastic deformation? (b) If the original specimen length is 106 mm, what is the maximum length to which it may be stretched without causing plastic deformation?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
question
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
question
Engineering, 04.07.2019 19:10
The air in an automobile tire with a volume of 0.015 m3 is at 32°c and 140 kpa gage. determine the amount of air that must be added to raise the pressure to the recommended value of 206 kpa gage. assume the atmospheric pressure to be 128 kpa and the temperature and the volume to remain constant.[r-0.287 kj/kgk]
Answers: 3
question
Engineering, 06.07.2019 02:30
An electric motor is used to drive a power press which makes steel turning moment diagrams 323 pressings from a metal sheet. the motor runs at a mean speed of 50 rev/s. the torque required is 10.0nm for 0.2s, followed by 1.0nm for0.3 s with this sequence then being repeated. what is the minimum power required of the motor and the moment of incrtia required for the t1ywhcel if the speed fluctuations are to be restricted to 1.5%?
Answers: 3
You know the right answer?
For a bronze alloy, the stress at which plastic deformation begins is 274 MPa and the modulus of ela...
Questions
question
Mathematics, 14.04.2020 21:16
question
Mathematics, 14.04.2020 21:16
question
Mathematics, 14.04.2020 21:16