subject
Engineering, 19.06.2020 03:57 natalia1978

Amdahl’s LAW Question: Suppose that we want to enhance the execution time used for web serving, two designs have been proposed, show which one is better
Design 1: Use a new processor 15 times faster than the original processor, assuming that the original processor is busy with computation 50% of the time and waiting for the I/O 50% of the time.
Design 2: Use a new Processor 20 time faster. While the processor is 30% of the time busy with the computation and 70% waiting for the IO

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
question
Engineering, 04.07.2019 18:20
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.
Answers: 2
question
Engineering, 04.07.2019 18:20
Prove the equivalence between the two statements of the 2nd law of thermodynamics (i.e., a violation of one statement leads to the violatio the other statement)
Answers: 2
question
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
You know the right answer?
Amdahl’s LAW Question: Suppose that we want to enhance the execution time used for web serving, two...
Questions
question
Mathematics, 21.02.2021 06:50
question
French, 21.02.2021 06:50
question
Mathematics, 21.02.2021 06:50
question
Mathematics, 21.02.2021 06:50
question
Physics, 21.02.2021 06:50
question
Business, 21.02.2021 06:50