subject
Engineering, 16.06.2020 17:57 wbrandi118

A test rocket is launched (zero initial velocity) in the desert at an initial height of 832 meters above sea level. The initial mass is 3380 kilograms and the final mass, after the solid fuel is burned, is 2440 kg. The rocket engine will burn for about 10.3 seconds. At the initial altitude above sea-level, the thrust of the engine is 153,510 Newtons. Assume a coefficient of k = 0.43 for drag. a) Assuming the initial height of h0 = 832 meters, integrate the velocity function to find a function for height during the launch. b) What does the model predict as the height at 10 seconds and at 11 seconds?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
question
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
question
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
A test rocket is launched (zero initial velocity) in the desert at an initial height of 832 meters a...
Questions