subject
Engineering, 15.06.2020 21:57 kev71

[Q3] A small-scale open cycle thermal power plant consists of a feed water supply system that includes a steam generator, a hydraulic feed pump and an electric motor as shown in the
figure below. Water from a nearby natural reserve is required to be supplied to the
steam generator using a feed pump which is driven by an electric motor of 20,000 Watts
capacity and 89% efficiency. The rate of flow of water through the pump is 60 kg/s and
the diameters of the suction and the exhaust pipes of the pump are same. Determine:
a) The mechanical work delivered by the motor to the hydraulic pump.
b) The mechanical power gained by water in the hydraulic pump.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
question
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
You know the right answer?
[Q3] A small-scale open cycle thermal power plant consists of a feed water supply system that inclu...
Questions
question
Mathematics, 28.05.2021 19:50
question
Biology, 28.05.2021 19:50