subject
Engineering, 13.06.2020 18:57 mojr1000

Specifications for a proposed earth fill require that the soil be compacted to 95% of the standard Proctor dry density. Tests on s Glacial-Till borrow material indicate a maximum dry density of 124 pcf at an optimum moisture content of 12%. The borrow material in its natural condition has a void ratio of 0.60. If the Gs of the soil particles is 2.65, what is the minimum volume of borrow required to make 1 cubic foot of acceptable compacted fill?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
question
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12Β°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
question
Engineering, 04.07.2019 18:20
Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10Γ€1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t
Answers: 3
You know the right answer?
Specifications for a proposed earth fill require that the soil be compacted to 95% of the standard P...
Questions
question
Mathematics, 31.01.2020 23:43
question
Business, 31.01.2020 23:44
question
Mathematics, 31.01.2020 23:44