While the ideal vapor-compression cycle maintains saturated vapor at the compressor inlet, it is common to adjust the mass flow rate and the evaporator conditions to maintain a level of superheat at the compressor inlet. Why do you think this is? What side-effects might this have on the cycle?

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?