Engineering, 06.06.2020 04:02 farrellandnandi

Q1) Design a concrete mixture proportions which will be used for offshore concrete platform. Norway is a world leader on offshore concrete platforms with 1a of the world’s 30 larger offshore concrete structures located on the Norwegian continental shelf. The first of these platforms where the Ekofisk Tank installed in 1974 and the last was Troll gravity based structure installed in 1996. The Sakhalin project is located in a harsh and artic environment where concrete structures have proven excellent characteristics with a minimum of maintenance. 80 mm slump value is required for the Sakhalin project. 28-days concrete characteristic strength is 2b MPa. It is required that no more than 1 test result in 100 will fall below the specified strength. The fine aggregate has a fineness modulus of 2.60 and Zone 3. For Coarse Aggregate (Uncrushed): SSD Bulk Specific Gravity: 2.65, Absorption Capacity: 2.b %, Total Moisture: 1.c % and Dry Rodded Unit Weight: 1345 kg/m3. For Fine Aggregate (Uncrushed): SSD Bulk Specific Gravity: 2.70, Total Moisture: 3.d % and Free Moisture: 2 %. Cement: Portland Composite Cement, Specific Gravity: 2.97. For 0.e5 m3 of concrete, binder amount is calculated as 120 kg (Use ACI Method of Mix Design) Note:(a is 8 b is 6 c is 1 d is 9 e is 9)

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.

Answers: 3

Answer

Engineering, 04.07.2019 19:20

Determine the time of the day and month of the year at which the peak sensible cooling load occurs for a top floor, north-eastern corner room of an office building in durban for the following conditions: floor area: 8 x 8 x 3 m east and north walls: 115 mm face brick (outside), 20 mm air space, 115 mm ordinary brick (inside) with 15 mm plaster roof construction: suspended plasterboard ceiling, 450 mm air space, 150 mm concrete, 75mm screed, waterproofing no heat transfer across other surfaces window area 3x 1,5 m high in north wall only. ordinary glass with venetian blinds. lights and occupants : from 07: 00 to 18: 00 average light density: 25 w/m2 number of occupants : 5 seated, light office work room temperature 24°c

Answers: 3

Answer

Engineering, 04.07.2019 19:20

Consider airflow over a flat plate of length l = 1.5 m under conditions for which transition occurs at le = 0.9 m based on the critical reynolds number, re,e = 5 x 10. evaluating the thermophysical properties of air at 400 k, determine the air velocity. (hint: use the tables to find the properties of air)

Answers: 3

Answer

You know the right answer?

Q1) Design a concrete mixture proportions which will be used for offshore concrete platform. Norway...

Questions