Engineering, 04.06.2020 02:57 dnsnmcmdmxmx
Tech A says that the difference between stored pulse width and the actual pulse width required to keep the mixture at the correct ratio is called fuel trim. Tech B says that the long-term trim values can be positive or negative. Who is correct?
A. Tech A
B. Tech B
C. Both A and B
D. Neither A nor B
Answers: 2
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 06.07.2019 03:20
Major ingredients of traditional ceramics (a) silica (b) clay (c) feldspar (d) all
Answers: 1
Engineering, 06.07.2019 04:20
Consider a beam traveling through diamond and impinging upon the diamond-air interface. the critical angle of incidence for total internal reflection to occur is closest to the following value: select one: a)-22.50° b)-23.85 c)-24.30 d)-23.40° e)-none of the above
Answers: 3
Tech A says that the difference between stored pulse width and the actual pulse width required to ke...
Biology, 26.10.2020 23:20
Advanced Placement (AP), 26.10.2020 23:20
Mathematics, 26.10.2020 23:20
Mathematics, 26.10.2020 23:20
Computers and Technology, 26.10.2020 23:20
Biology, 26.10.2020 23:20
Mathematics, 26.10.2020 23:20
English, 26.10.2020 23:20
Mathematics, 26.10.2020 23:20
English, 26.10.2020 23:20